Cata Bond FTA is a specially formulated premium-grade (C1) adhesive designed for the installation of large-format tiles and stones on floors. Cata Bond FTA contains high-grade polymers, silica, fillers, fibers, and special additives.
CATABOND BRICK FIX is a high-strength adhesive for the quick and firm laying of AAC blocks with thin joints. Made from cement and graded sand, and blended with polymers, it provides high strength and water retention properties even in layers as thin as 2-3 mm.
Catabond ETA is a specially formulated premium-grade (C2TE S1) flexible adhesive for the installation of absorbent and non-absorbent tiles and stones. Catabond ETA contains high-grade polymers, silica, fillers, fibers, and special additives.
Catacreete (Part B for ETA - Exterior Tile Adhesive) is an acrylic latex emulsion with special additives. When Catacreete is mixed with Catabond Tile Adhesives, it increases adhesion and bonding strength to substrates, improves plasticity, and enhances resistance to water and humidity.
CATABOND BRICK FIX is a high-strength adhesive for the quick and firm laying of AAC blocks with thin joints. Made from cement and graded sand, and blended with polymers, it provides high strength and water retention properties even in layers as thin as 2-3 mm.
Catamix TB Tile Bonder is a polymer additive that needs to be pre-mixed with cement or a cement-sand blend and then combined with water for installing tiles and natural stones. This should be applied using a traditional cement slurry over a freshly laid leveling bed or mechan.
Cataclean-TC is a high-performance tile and ceramic cleaning liquid designed to eliminate yellow spots, grime, stains, oil, wax, and moss. This product is formulated for use on tiled floors, walls, bathrooms, toilets, and other tiled areas in both domestic and commercial spaces.
Catagrout is a cement-based tile joint filler suitable for use on both floor and wall tiles. It features a water-resistant formula that effectively fills gaps. Catagrout is designed for grouting various types of tiles, including glazed, ceramic, porcelain, vitrified, fully vitrified tiles, and natural stones.
Catamix-GA is an acrylic polymer-based admixture designed for use with Catagrout or other grouts to enhance the performance and durability of the tile grout. It provides improved flexibility, strength, and water and stain resistance, making it suitable for grouting wider joints.
Catabond SBR is a styrene-butadiene rubber copolymer-based product used in repair mortars and concrete as an admixture and bonding agent. It enhances water resistance and durability.
Catabond AC is a single-component, acrylic polymer-based emulsion designed as an admixture for cementitious mortars and screeds. It serves as a bonding and curing agent for concrete, patch repairs, and is also used for waterproofing.
Cataflex-2K is a two-part, acrylic-modified cementitious coating. It is a blend of cement, selected fillers, polymers, and graded silica sand in powder form. The liquid component contains acrylic copolymers and wetting agents.
Caatabit RBE Bitumen Waterproof is a thixotropic, flexible protective barrier against water and vapor transmission for below-ground concrete structures that are above the water table.
Catabit WB Bitumen Waterproof is a thixotropic bitumen protective coating. The coating dries to form a black, flexible protective film that creates a tough barrier against water and vapor transmission.
Wallsealer WB is a single-component, highly protective treatment for concrete, masonry, and stonework. It works by coating these substrates and reacting with moisture or water vapor present in the material, thereby forming a hydrophobic lining.
Cataseal PU-FLX is a one-part, low-modulus, high-performance polyurethane sealant that cures upon absorption of atmospheric moisture. It forms a firm and flexible rubber watertight seal for moderate movement and control joints. Cataseal PU-FLX can be used in both horizontal and vertical applications, with a Movement Accommodation Factor (MAF) of ±25%.
Catamesh is a glass fiber mesh fabric combined with specially designed mesh for surface treatments. It can be used in a wide range of applications. Catamesh, an alkali-resistant fiberglass mesh, is used in waterproofing systems and is embedded in the base coat to provide effective reinforcement for the render.
Tile spacers are specially designed to create uniform gaps between tiles, ensuring proper alignment throughout the tiling area. The spacers are available in various widths, ranging from 2 mm to 10 mm. Packaging: 100 pieces per pack.
Tile Leveling Wedges are designed for faster and easier tile installation. Easy to operate, they ensure perfectly flat floor and wall coverings, even in challenging cases such as the installation of large-format slabs. Just two components and one simple movement are enough to quickly and accurately prevent lippage between adjacent tiles. Additionally, there is no need to use spacers to create grout lines. Packaging: 50 pieces per pack
Tile Leveling Clips are designed for a faster and easier tile installation. Easy to operate, it enables to obtain perfectly flat floor and wall coverings, even in the most difficult cases, such as the installation of large format slabs. Just two components and one simple movement are enough to quickly and accurately prevent lippage between adjacent tiles. Additionally, no need to use spacers to create grout lines. Packing-SO nos.
Tile Leveling Reusable Jacks are made from high-density polyethylene, allowing them to be reused multiple times. They are a low-cost and easy-to-use product. The Reusable Jack functions as a T-lock master leveling system, a pro-leveling tile leveling system, and as tile leveling clips.
Tile Leveling Spinner & Clip features a free-spin design that allows the spinner to turn the spacer screw with minimal effort. This enables installers to tighten the spinner with just one hand, which is especially useful for installing large-format tiles. When installation is complete, simply kick off the caps to remove them. The spinner caps are reusable for multiple jobs.
TTwo-part high-performance epoxy for tile joints. It features extremely easy application and cleaning. With stable and uniform mechanical strength, it is also waterproof and offers excellent chemical resistance. Suitable for both wall and floor applications.
Universal Tile Adhesive is a specially formulated premium-grade (C2TE S1) flexible adhesive for absorbent and non-absorbent tile and stone installations. Catabond UTA contains high-grade polymers, silica, fillers, fibers, and special additives. It is recommended for both interior and exterior applications.
Available in - 600 mlCatalyst India, Coimbatore-1,
Tamilnadu, India
Monday to Friday: 9:00 AM - 6:00 PM
Saturday: 10:00 AM - 2:00 PM